葛廷彬的学习博客

记录学习工作中碰到的问题

H3C交换机配置WEB界面

把交换机恢复出厂设置:
在交换机启动的过程出现提示按CTRL+B的时候按下CTRL+B,
进入BIOS界面
************************************************************
*                                                                          *
*                  H3C S5110-52P BootWare, Version 1.11                   
*                                                                          *
***************************************************************
Copyright (c) 2004-2014 Hangzhou H3C Technologies Co., Ltd.

Compiled Date       : Jul 11 2014 17:08:02
CPU Type            : MIPS34kc
CPU L1 Cache        : 32KB
CPU Clock Speed     : 650MHz
Memory Type         : DDR3 SDRAM
Memory Size         : 128MB
Memory Speed        : 200MHz
BootWare Size       : 3MB
Flash Size          : 32MB


BootWare Validating...
Press Ctrl+B to enter extended boot menu...
BootWare password: Not required. Please press Enter to continue.
在这个视图下选择6进入重启不运行当前文件,

===========================<EXTEND-BOOTWARE MENU>=
|<1> Boot System                                                           |
|<2> Enter Serial SubMenu                                                  |
|<3> Enter Ethernet SubMenu                                                |
|<4> File Control                                                          |
|<5> Restore to Factory Default Configuration                              |
|<6> Skip Current System Configuration                                     |
|<7> BootWare Operation Menu                                               |
|<8> Clear Super Password                                                  |
|<9> Storage Device Operation                                              |
|<0> Reboot                                                                |
========================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9): "6"
然后按"0"对交换机进行重启
重启后:
<H3C>sys  “进入系统视图”
[H3C]undo ip http enable   //“关闭远程访问”
[H3C]ip http enable   //“开启远程访问”
[H3C]local-user admin   //“进入ADMIN用户对admin进行配置”
[H3C-luser-admin]password simple qitian20190305 //“对admin这个用户设置密码”
[H3C-luser-admin]authorization-attribute level 3 //“给ADMIN用户的权限提升到最高”
[H3C-luser-admin]service-type web //‘让ADMIN这个用户可以进行登录WEB’
[H3C-luser-admin]quit  //"退出"
[H3C]vlan 10   //“创建VLAN10”
[H3C-vlan10]quit   //“退出”
[H3C]interface Vlan-interface 10    //“进入vlan10进行配置“
[H3C-Vlan-interface10]ip address 192.168.1.1 24   // ”给VLAN10添加IP“
[H3C-Vlan-interface10]quit   // ”退出“
[H3C-GigabitEthernet1/0/48]port access vlan 10   //‘把48端口添加到VLAN10里面’
<H3C>save    //‘保存退出’//切记切记


发表评论:

◎欢迎参与讨论,请在这里发表您的看法、交流您的观点。

Powered By Z-BlogPHP 1.5.2 Zero

鲁ICP备19064028号 13658636711 getingbin@126.com